Sharp PC-9080 Spécifications télécharger pdf (Page 87)

4-12 Connecting a Keyboard or Mouse

Connecting a Keyboard or Mouse

If you wish to use a full size desktop keyboard or external PS/2 mouse with your

notebook, follow the instructions below.

1. Be sure that the notebook is turned off.

2. Locate the PS/2 keyboard/mouse port on the rear of the notebook.

3. Attach the PS/2 cable from your mouse or keyboard cable to the PS/2

keyboard/mouse port, as illustrated below.

Figure 4-9. Connecting an External Keyboard or PS/2 Mouse

4. Power on any other peripheral devices you may have connected to the

notebook, and then turn on the notebook.

Never connect or disconnect PS/2 devices to the PS/2 keyboard/mouse

port when the notebook is powered on. This may cause the notebook to

malfunction.

GlidePoint Control

When connecting a mouse to your notebook, disable the GlidePoint. When

disconnecting, enable back the GlidePoint.

From the Start menu, select Programs - SHARP Applications - GlidePoint

Control.

Select Disables or Enables GlidePoint.

Click OK.

•

Make sure the mouse is enabled before disabling the GlidePoint. If the

mouse is not enabled, the cursor does not move when you move the

mouse.

•

If the system enters the suspend mode while the GlidePoint is disabled,

the GlidePoint becomes enabled after resuming from the suspend

mode.

PS/2 Keyboard/Mouse Connector

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 113 114

Pas de commentaire

Sharp PC-9080 Spécifications Page 87