Sharp PGF-267X Guide d'installation télécharger pdf (Page 12)

-12

Click “Internet Protocol Version 4

(TCP/IPv4)”, and click the

“Properties” button.

Conﬁ rm or change an IP address

for the setup computer.

1 Conﬁ rm and note the current IP

address, Subnet mask and Default

gateway.

Make sure to note the current IP address,

Subnet mask and Default gateway as you

will be required to reset them later.

2 Set temporarily as follows:

IP address: 192.168.150.3

Subnet mask: 255.255.255.0

Default gateway: (Do not input any

values.)

The factory default settings for the projector are

as follows:

DHCP Client: OFF

IP address: 192.168.150.2

Subnet mask: 255.255.255.0

Default gateway: 0.0.0.0

•

Note

After setting, click the “OK”

button, and then restart the

computer.

After conﬁ rming or setting, proceed to “3. Setting up Network Connection for the Projector”.

Setting up the Projector Network Environment

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 33 34

Pas de commentaire

Sharp PGF-267X Guide d'installation Page 12