Sharp Notevision XR-1X Spécifications télécharger pdf (Page 65)

Appendix

Problem

Picture is green on

INPUT 1 COMPONENT.

Picture is pink (no green)

on INPUT 1 RGB.

Picture is too bright and

whitish.

The cooling fan becomes

noisy.

The lamp does not light

up even after the

projector turns on.

The lamp suddenly turns

off during projection

The image sometimes

flickers.

The lamp needs much

time to turn on.

Picture is dark.

Check

• Change the input signal type setting.

• Image adjustments are incorrectly set.

• When temperature inside the projector increases, the cooling fan

runs faster.

• The lamp indicator is illuminating in red.

Replace the lamp.

• Cables incorrectly connected to the projector or the connected

equipment works improperly.

• If this happens frequently, replace the lamp.

• The lamp will eventually need to be changed.

While the remaining lamp life draws to a close, replace the lamp.

Page

–

23, 24,

25, 51, 56

This unit is equipped with a microprocessor. Its performance could be adversely affected by incorrect operation

or interference. If this should happen, unplug the Unit and plug it in again after more than 30 seconds.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70

Pas de commentaire

Sharp Notevision XR-1X Spécifications Page 65