Sharp AL-1631 Spécifications télécharger pdf (Page 20)

Set the paper guides to the paper width. Insert the paper (print

face down) all the way into the multi-bypass tray.

Press the tray select ( ) key to select the multi-bypass tray.

• Paper must be fed narrow side into the feed slot.

•

Special papers such as transparency film, labels, and envelopes

must be fed one sheet at a time through the multi-bypass tray.

• When copying onto transparency film, remove each copy

promptly. Do not let copies stack up.

Note for loading envelopes

• Envelopes must be fed narrow side into the feed slot at a time.

• Do not use non-standard envelopes, and envelopes that have metal clasps, plastic snappers,

string closures, windows, linings, self-adhesive, patches or synthetic materials. Do not use

envelopes that are filled with air or envelopes that have labels or stamps attached.

• Envelopes of which the surface is not flat because of embossing may cause the

copies/prints to become smudged.

• Under high humidity and temperature conditions the glue flaps on some envelopes

may become sticky and be sealed closed when copied/printed.

• Use only envelopes which are flat and crisply folded. Curled or poorly formed

envelopes may be poorly printed or may cause misfeeds.

• Be sure to select either Com10, DL, C5 or Monarch on the paper size setting of the

printer driver. (For detailed information on printer driver, refer to the online manual.)

• It is recommended that you perform a test print before performing the actual copied/

printed job.

Print face

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 99 100

Pas de commentaire

Sharp AL-1631 Spécifications Page 20