Sharp CV -P09FX Manuel d'utilisateur télécharger pdf (Page 29)

ENGLISH

E-27

ON TIMER

Display shown when you set

the unit to turn on 6.5 hours

later.

The unit will turn on automatically according to your setting.

Timer duration can be set from a minimum of half an hour (30 minutes) to a

maximum of 12 hours.

Up to 9.5 hours, you can set in half-hour (30-minute) increments and from 10 to 12

hours, in 1-hour increments.

Point the remote control at the signal receiver win-

dow on the unit.

Press the ON TIMER button.

• The time setting will change as you press the button

as follows.

Hold the button down to speed through the set-

tings.

• The orange TIMER lamp on the unit will light.

• The unit will emit a beep when it receives the signal.

• The time setting will count down to show the re-

maining time.

TO CANCEL TIMER

Press the CANCEL button.

• The orange TIMER lamp on the unit will turn off.

Select the mode, temperature, fan speed setting

and PLASMACLUSTER operation as desired.

• When the temperature is set with the ON TIMER,

the temperature will show in the display for 5 sec-

onds and then return to the time display.

• If you do not change the setting, the unit will operate

using the most recent setting.

0.5h 1.0h 1.5h 10h 11h 12h

1 2 ... 24 25 26 27 28 29 30 31 32 33

Pas de commentaire

Sharp CV -P09FX Manuel d'utilisateur Page 29