Sharp IV-C35M Manuel d'utilisateur télécharger pdf (Page 31)

4-2

Part Names and Functions

4-2 Camera

[1] Camera

(1) Color camera (IV-C30C5)

-To connect a color camera (IV-C30C5) to the IV-C35M controller, use the camera cable (IV-

S30KC3/KC5) shown above.

(2) High-speed monochrome camera (IV-S30C3)

- To connect a high-speed monochrome camera (IV-S30C3) to the IV-C35M controller, use camera

cable (IV-S30KC3/KC5) shown above.

Lens holder

FunctionName

The holder is used to make fine adjustment to the distance (back plane fo-

cus) between the CCD section and camera lens using a focus fixed lens.

(The distance has been adjusted before shipment. Usually, it does not

need to be adjusted.)

- To adjust it, loosen the upper lock screw, and turn the lens holder coun-

ter-clockwise. The maximum allowable distance is 1.5 mm.

Cable

connector

Connect this connector to the camera cable (IV-S30KC3/KC5).

2 Cable connector

CCD section

1 Lens holder

Front view (view A) of the CCD

Lock screw (for securing the lens holder)

⇒