Sharp AQUOS LC-40E77U Manuel de service télécharger pdf (Page 8)

LC-40E67U/LC-40E77U

2 – 3

Confirm that there are 8 screws supplied with the

stand unit.

Attach the supporting post for the stand unit onto

the base using the box for the stand unit as shown

below.

The supporting post attaches to the base at an off-centered

location on the base. Be sure to attach the supporting post in

the direction indicated below and attach the stand to the TV

with the wider side of the base facing forward.

Screws

•

Attaching the Stand

Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.

Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

•

QUICK REFERENCE

Insert the stand into the openings on the bottom

of the TV.

Insert and tighten the 4 screws into the 4 holes

on the rear of the TV.

Screws

Soft cushion

To detach the stand, perform the steps in reverse order.•

CAUTION

Attach the stand in the correct direction.

Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

•

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 111 112

Pas de commentaire

Sharp AQUOS LC-40E77U Manuel de service Page 8