Sharp LC-70UQ10EN Spécifications Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 10
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
5
Attaching the stand unit
Before attaching (or detaching) the stand, unplug the AC cord.
Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will
prevent it from being damaged.
Be sure that two or more persons attach the stand.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
After attaching the stand to the TV, do not hold the
stand when you put up, set up, move or lay down the TV.
Do not remove the stand from the TV unless using a
wall mount bracket to mount it.
1 Confirm that there are 14 screws (twelve M5
screws and two M4 screws) supplied with the
stand unit.
2 Attach the supporting post to the stand base.
1 Insert the claws of the supporting post into
the stand base.
2 Secure the post and the base using the M5
screws (length: 14 mm) and a screwdriver.
3 Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
Make sure that the stand is firmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
Soft cushion
4 Insert and tighten the M5 screws (length: 14 mm)
into the holes on the rear of the TV.
M5 screws
5 Attaching the stand cover.
1 Insert the stand cover.
2 Insert and tighten the M4 screw (length:
8 mm) into the holes of the stand cover.
Tighten the screw by pressing the bottom of the
stand base to the TV side.
M4 screw
NOTE
To detach the stand unit, perform the steps in reverse
order.
A screwdriver is not supplied with this product.
In the installation procedure, be careful not to catch
your fingers between the TV set and the floor.
Preparation
M5 screws
Vue de la page 6
1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire