Sharp XL-DH20NH Spécifications Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 24
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
04/1/28 XL-DH10N 20H_EN
10
Listening to a CD or MP3/WMA disc
(continued)
Caution:
Do not place two discs in one disc tray.
Do not play discs of special shapes (heart, octagon,
etc). It may cause malfunctions.
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the
power is restored.
If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
Be sure to place 8 cm (3") disc in the middle of the disc
tray.
Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
Notes for CD or MP3/WMA disc:
When the end of the last track is reached during fast
forward, the CD operation will be stopped. When the
beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
Rewritable multi-session discs with unfinished writing,
can still be played.
Advanced CD or MP3/WMA disc
playback
By using the Direct Search buttons, the desired tracks on
the current disc can be played.
Use the Direct Search buttons on the remote control to
select the desired track whilst playing the selected
disc.
The Direct Search buttons allow you to select up to
number 9.
When selecting number 10 or higher, use the “10+”
button.
Notes:
A track number higher than the number of tracks on the
disc cannot be selected.
During random play, direct search is not possible.
To stop playback:
Press and hold / button on main unit or press CD
button.
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “RPT ONE”
appears. Press the / button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “RPT ALL
appears. Press the / button.
To repeat all desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page
11 and then press the PLAY MODE button until “RPT ALL
appears.
To cancel repeat play:
Press the PLAY MODE button again until
disappears.
Disc playback
1
Press the ON/STAND-BY button to turn the power on.
2 Press the CD button on the remote control or
FUNCTION button on the main unit repeatedly to select
CD function.
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the disc on the disc tray, label side up.
5 Press the OPEN/CLOSE button to close the disc tray.
6 Press the / button to start playback. After the last
track is played, the unit will stop automatically.
Various disc functions
Function Main
unit
Remote
control
Operation
Play Press in the stop mode.
Stop Press in the playback
mode. Press and hold
the / button to stop
playback.
Pause Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Track up/
down
____
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start
the desired track.
Fast
forward/
reverse
____ Press and hold down in
the playback mode.
Release the button to
resume playback.
Direct track search
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
3 Press the “3” button.
B. For example, to choose 130
1 Press the “10+” button twice.
2 Press the “1” button.
3 Press the “3” button.
4 Press the “0” button.
Repeat play
CD
USB
MUTE
MUTE
CLOCK/TIMER
CLOCK/TIMER
TUNING/
FOLDER
AUX
AUX
PTY
PTY
RDS
RDS
Selected track number
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Commentaires sur ces manuels

Pas de commentaire