Sharp PN-R903 Guide de démarrage rapide télécharger pdf (Page 10)

• When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people.

• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.

• This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

• To attach a mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the thickness of the

mounting bracket.

• Do not use an impact driver.

• When moving the monitor, be sure to hold it with the handles, the unit bottom and the side of unit. Do not hold the LCD panel.

This may cause product damage, failure, or injury.

• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.

• Do not use any screw holes other than those for mounting brackets, located on the rear of the monitor, for installation.

n

Removing the temporary stand used in the package for transportation

Model PN-R903

Power requirement AC 100 V - 240 V, 7.5 A, 50/60 Hz

Operating temperature

32°F to 104°F (0°C to 40°C)

Operating humidity 20% to 80% (no condensation)

Power consumption (Maximum) 660 W

Dimensions (excluding protrusions) inch (mm)

Approx. 80-7/8 (W) x 4-13/16 (D) x 47-1/8 (H) (2055 x 122 x 1197)

Weight lbs. (kg)

Approx. 165.3 (75) (excluding the temporary stand used in the package

for transportation)

* Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such

cases, please check the temperature condition specied by the optional equipments.

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement

without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from

these values in individual units.

Specications

Mounting Precautions (For SHARP dealers and service engineers)

Caution

• The temporary stand used in the package for transportation

is only for use with this monitor. Do not use it for any other

devices.

1. Spread a soft thick cloth (such as a blanket) on a

stable level surface on which the entire monitor can

be placed, and place the monitor on it with the screen

facing down.

2. Remove the stand xing screws and then remove the

stand.

3. Attach the cover (supplied) onto the back of the

monitor.

Secure using 2 cover screws (supplied).

Apply the screw masking sheets (supplied).

Screw masking

sheets (supplied)

Cover screws

(supplied)

Cover

(supplied)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Sharp PN-R903 Guide de démarrage rapide Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour écrans plats Sharp PN-R903