Sharp DV-HR300U Manuel de service télécharger pdf (Page 16)

DV-HR300U

FLOW CHART No.2

Drive is not working properly (communication failure with IC7506).

Is ATAPI reset released? (CN4501 pin 1 R4537: "H" level)

Check IC7506 and peripheral

circuits.

YES

Check following items.

Check power unit and PC_12V

and PC_5V circuits.

Communicating with drive via ATAPI?

Access drive when CN4501 pin 37 CS0 and pin 38 CS1 are at "L"

level. (Communication is ongoing if intermittently set at LOW.)

CN4501 pin 35 DA0, pin 33 DA1, pin 36 DA2 and ATAPI register

address (Intermittently set at LOW).

CN4501 pin 31 INTRQ is at "H" level when drive interrupts. Output

after processing transfer command from IC7506, etc.

CN4501 pin 21 DMARQ is at "L" level when drive requests data

transfer.

CN4501 pin 29 DMACK is at "L" level when IC7506 receives data

transfer for DMARQ from drive.

When CN4501 pin 25 DIOR and pin 23 DIOW are at "L" level,

IC7506 sends REASD/WRITE to drive. (Communication is ongoing

if CS and DA are intermittently set at LOW.)

Are 12V and 5V applied to drive?

FLOW CHART No.3

HDD is not working properly (communication failure with IC7506).

Is ATAPI reset released? (CN4502 pin 40 R4566: "H" level)

Check IC7506 and peripheral

circuits.

YES

Check following items.

Check power unit and PC_12V

and PC_5V circuits.

Communicating with drive via ATAPI?

Access drive when CN4502 pin 4 CS0 and pin 3 CS1 are at "L"

level. (Communication is ongoing if intermittently set at LOW.)

CN4502 pin 6 DA0, pin 8 DA1, pin 5 DA2 and ATAPI register

address (intermittently set at LOW).

CN4502 pin 10 INTRQ is at "H" level when drive interrupts. Output

after processing transfer command from IC7506, etc.

CN4502 pin 20 DMARQ is at "L" level when drive requests data

transfer.

CN4502 pin 12 DMACK is at "L" level when IC7506 receives data

transfer for DMARQ from drive.

When CN4502 pin 16 DIOR and pin 18 DIOW are at "L" level,

IC7506 sends REASD/WRITE to drive. (Communication is ongoing

if CS and DA are intermittently set at LOW.)

Are 12V and 5V applied to HDD?

Is MPEG2_PS data signal properly connected between pins of

IC7304 and IC4501?

IC7304 pin 66 → IC4501 pin 138 OSSTD (stream data strobe)

IC7304 pins 56-59, 61, 63-65 → IC4501 pins 3-7, 10-12

OS [7:0] (stream data)

IC7304 pin 70 ← IC4501 pin 141 OSREQ ("L" level when

IC4501 requests data transfer.)

IC7304 pin 68 → IC4501 pin 13 OSVLD (stream data valid)

IC7304 pin 67 → IC4501 pin 19 OSSYNC (stream data sync)

FLOW CHART No.4

Recording is impossible (MPEG stream check)

Check IC7304, IC4501 and peripheral

circuits as well as lines between pins of

IC7304 and IC4501.

YES

Check IC4501, IC7506 and peripheral

circuits as well as lines between pins of

IC4501 and IC7506.

Is MPEG2_PS data signal properly connected between pins of

IC4501 and IC7506?

IC4501 pin 18 ← IC7506 pin 208 SBCLK (transfer clock 27MHz)

IC4501 pin 23 → IC7506 pin 240 SBDAT (stream data)

IC4501 pin 22 → IC7506 pin 234 SBVALID ("H" level when

transferred data is valid)

IC4501 pin 21 ← IC7506 pin 213 SBREQ ("H" level when

IC7506 requests data transfer)

IC4501 pin 20 → IC7506 pin 239 SBSOS (sector head signal)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Sharp DV-HR300U Manuel de service Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD Sharp DV-HR300U