Sharp DX-C400 - Color - All-in-One Spécifications télécharger pdf (Page 34)

REPLACING SUPPLIES AND MAINTENANCE

Regular maintenance

To ensure that the machine continues to provide top quality performance,

periodically clean the machine.

Cleaning the document glass and automatic

document feeder

If the document glass or document backplate sheet becomes dirty, the dirt will

appear as dirty spots, coloured lines, or white lines in the scanned image. Always

keep these parts clean.

Wipe the parts with a clean, soft cloth.

If necessary, moisten the cloth with water or a small amount of neutral detergent.

After wiping with the moistened cloth, wipe the parts dry with a clean dry cloth.

Document glass Document backplate sheet

Warning

Do not use a flammable spray to clean the machine. If gas from the spray comes

in contact with hot electrical components or the fusing unit inside the machine,

fire or electrical shock may result.

• Do not use thinner, benzene, or similar volatile cleaning agents to clean the

machine. These may degrade or discolour the housing.

• When using the MX-C311/MX-C381,

use a soft cloth to gently wipe off dirt

from the area on the operation panel

with a mirror-like finish (shown at

right). If you use a stiff cloth or rub

hard, the surface may be damaged.

The area with a mirror-like finish is

the area that is .

When wiping dirt off the machine, do not press down hard on the machine. This

may damage or deform the machine.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 79 80

Pas de commentaire

Sharp DX-C400 - Color - All-in-One Spécifications Page 34