Sharp AR-C330 Key operators Manuel d'installation

Naviguer en ligne ou télécharger Manuel d'installation pour Copieurs Sharp AR-C330 Key operators. Sharp AR-C330 Key operators Unit installation Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 66
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 1
[10] SELF DIAG MESSAGE AND TROUBLESHOOTING
1. Outline
When a trouble occurs in the machine or when the life of a con-
sumable part is nearly expired or when the life is expired, the
machine detects and displays it on the display section or notifies to
the user or the serviceman by voice messages.
This allows the user and the serviceman to take the suitable
action. In case of a trouble, this feature notifies the occurrence of a
trouble and stops the machine to minimize the damage.
2. Function and purpose
1) Securing safety. (The machine is stopped on detection of a
trouble.)
2) The damage to the machine is minimized. (The machine is
stopped on detection of a trouble.)
3) By displaying the trouble content, the trouble position can be
quickly identified. (This allows to perform an accurate repair,
improving the repair efficiency.)
4) Preliminary warning of running out of consumable parts allows
to arrange for new parts in advance of running out. (This
avoids stopping of the machine due to running out the a con-
sumable part.)
3. Self diag message kinds
The self diag messages are classified as shown in the table below.
4. Self diag operation
A. Self diag operation and related work flow
The machine always nonitors its own state.
When the machine recognizes a trouble, it stops the operation and
displays the trouble message.
A warning message is displayed when a consumable part life is
nearly expired or is expired.
When a warning message is displayed, the machine may be or
may not be stopped.
The trouble messages and the warning messages are displayed
by the LCD.
Some trouble messages are automatically cleared when the trou-
ble is repaired. Some other troubles must be cleared by a simula-
tion.
Some warning messages of consumable parts are automatically
cleared when the trouble is repaired. Some other warning mes-
sages must be cleared by a simulation.
Class 1 User Warning of troubles which can be
recovered by the user. (Paper jam,
consumable part life expiration, etc.)
Serviceman Warning of troubles which can be
recovered only by a serviceman.
(Motor trouble, maintenance, etc.)
Other
Class 2 Warning Warning to the user, not a machine
trouble (Preliminary warning of life
expiration of a consumable part, etc.)
Trouble Warning of a machine trouble. 'The
machine is stopped.
Other
The contents are detected
and analyzed.
Trouble/Warning
The machine conditions
are monitored.
Operation stop
The content is displayed.
Trouble/Warning
The cause of trouble
is investigated.
Repair
The self diag message
is cleared by a diag
(test command).
Recovery
Standby
Warning
Trouble
Warning
Trouble
Is the life
of a consumable
part expired ?
Replace or supply
the consumable part.
NO
YES
SHARP TROUBLE & ERROR CODES
AR-C330
Vue de la page 0
1 2 3 4 5 6 ... 65 66

Résumé du contenu

Page 1 - 4. Self diag operation

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 1[10] SELF DIAG MESSAGE AND TROUBLESHOOTING1. OutlineWhen a trouble occurs in the machine or whe

Page 2

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 10Main codeSub codeTitleToner concentration reference control level setup trouble (Overtoner)EE EL

Page 3

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 11Main codeSub codeTitleShading trouble (Black correction)E7 10 Phenomena Display LampMessageDetai

Page 4

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 12Main codeSub codeTitleLaser beam sensor trouble (BLACK)E7 20 Phenomena Display LampMessageDetail

Page 5

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 13Main codeSub codeTitleLaser beam sensor trouble (MAGENTA)E7 22 Phenomena Display LampMessageDeta

Page 6 - 6. Details

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 14Main codeSub codeTitleLaser beam detection trouble (BLACK)E7 24 Phenomena Display LampMessageDet

Page 7

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 15Main codeSub codeTitleLaser beam detection trouble (MAGENTA)E7 26 Phenomena Display LampMessageD

Page 8

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 16Main codeSub codeTitleICU PWB FLASH ROM troubleE7 30 Phenomena Display LampMessageDetail After t

Page 9

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 17E8 0 Case 2 Trouble position/causePCU MAIN PWB troubleRemedy (Check)(Repair) Replace the PCU MAI

Page 10

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 18F1 0 Case 2 Trouble position/causeFinisher control PWB errorRemedy (Check)(Repair) Replace the f

Page 11

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 19F1 10 Case 2 Trouble position/causeStaple unit mechanism section troubleRemedy (Check) Check the

Page 12

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 25. ListMain codeSub codeTitle (Content) SectionOperation modeRemedy NOTEA0 0 ROM trouble (PCU MAI

Page 13

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 20F1 15 Case 2 Trouble position/causeTray lift motor trouble / Tray upper limit sensor trouble / T

Page 14

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 21F1 20 Case 2 Trouble position/causeAlignment motor trouble / Alignment plate home position senso

Page 15

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 22Main codeSub codeTitleSorter transport motor trouble (Sorter side detection)F1 81 Phenomena Disp

Page 16

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 23Main codeSub codeTitleSorter staple unit oscillation motor trouble (Sorter side detection)F1 87

Page 17

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 24Main codeSub codeTitleBin paper sensor auto adjustment trouble (Sorter side detection)F1 91 Phen

Page 18

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 25Main codeSub codeTitleToner concentration sensor trouble (CYAN)F2 41 Phenomena Display LampMessa

Page 19

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 26Main codeSub codeTitleToner concentration sensor trouble (YELLOW)F2 43 Phenomena Display LampMes

Page 20

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 27Main codeSub codeTitleImage density sensor trouble (COLOR) (Calibration plate reflection abnorma

Page 21

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 28F2 50 Case 4 Trouble position/causeOPC drum surface dirt, scratch / A different type of OPC drum

Page 22

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 29F2 52 Case 2 Trouble position/causeBad connection of the signal line of PCU MAIN PWB / process c

Page 23

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 3F1 70 PCU PWB - sorter control PWB communication trouble (PCU detection)Sorter / PCU MAIN PWBWarm

Page 24

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 30Main codeSub codeTitleDrum marking sensor gain adjustment error (BLACK)F2 54 Phenomena Display L

Page 25

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 31F2 55 Case 2 Trouble position/causeBad connection of the signal line between PCU MAIN PWB / Proc

Page 26

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 32F2 56 Case 4 Trouble position/causeOPC drum surface dirt, scratch / A different type of OPC drum

Page 27

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 33F2 58 Case 1 Trouble position/causeBad connection between the image density sensor and the PCU S

Page 28

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 34F2 80 Case 2 Trouble position/causeTransfer belt trouble (dirt, scratch)Remedy (Check) Toner dis

Page 29

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 35Main codeSub codeTitleHalf tone correction (1st patch) trouble (CYAN)F2 81 Phenomena Display Lam

Page 30

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 36F2 81 Case 8 Trouble position/causeScanner (writing) unit trouble (Scanner (writing) motor troub

Page 31

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 37F2 82 Case 7 Trouble position/causeTransfer troubleRemedy (Check) Transfer roller check / High v

Page 32

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 38F2 83 Case 6 Trouble position/causeDeveloping bias output troubleRemedy (Check) Developing bias

Page 33

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 39F2 84 Case 5 Trouble position/causeMain charger output troubleRemedy (Check) Main charger contac

Page 34

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 4F2 80 Half tone correction (1st patch) trouble (BLACK)Image process Image density correction Powe

Page 35

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 40F2 85 Case 4 Trouble position/causePCU MAIN PWB troubleRemedy (Check)(Repair) Replace the PCU MA

Page 36

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 41F2 86 Case 2 Trouble position/causeTransfer belt trouble (dirt, scratch)Remedy (Check) Toner dis

Page 37

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 42F2 87 Case 1 Trouble position/causeImage density sensor troubleRemedy (Check) Check the image de

Page 38

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 43F2 87 Case 8 Trouble position/causeScanner (writing) unit trouble (Scanner (writing) motor troub

Page 39

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 44F2 90 Case 7 Trouble position/causeTransfer troubleRemedy (Check) Transfer roller check / High v

Page 40

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 45F3 22 Case 3 Trouble position/causeBad connection between the PCU MAIN PWB and the lift unit.Rem

Page 41

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 46F3 42 Case 3 Trouble position/causeBad connection between the PCU MAIN PWB and the lift unit.Rem

Page 42

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 47H2 0 Case 2 Trouble position/causePCU SUB PWB troubleRemedy (Check) Check the PCU SUB PWB fusing

Page 43

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 48H2 3 Case 1 Trouble position/causeFusing main temperature sensor (lower) (Thermistor) output lin

Page 44

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 49Main codeSub codeTitleFusing section high temperature trouble (THS3)H3 2 Phenomena Display LampM

Page 45

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 5L4 3 Fusing motor trouble Fusing Warm-up / Copy/ PrintPower Source-ON4Developing motor trouble (B

Page 46

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 50H4 0 Case 4 Trouble position/causeAC main power PWB trouble Remedy (Check) Check the operation o

Page 47

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 51Main codeSub codeTitlePaper jam in the fusing/paper exit sectionH5 1 Phenomena Display LampMessa

Page 48

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 52H7 0 Case 2 Trouble position/causePCU SUB PWB troubleRemedy (Check) Check the PCU SUB PWB HLV si

Page 49

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 53L3 0 Case 3 Trouble position/causeScanner mechanism section troubleRemedy (Check) Check the scan

Page 50

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 54Main codeSub codeTitleDeveloping motor trouble (COLOR)L4 5 Phenomena Display LampMessageDetail T

Page 51

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 55Main codeSub codeTitleDC power cooling fan troubleL4 32 Phenomena Display LampMessageDetail Samp

Page 52

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 56Main codeSub codeTitleScanner (writing) motor lock detection (MAGENTA)L6 12 Phenomena Display La

Page 53

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 57L8 1 Case 4 Trouble position/causeDC SUB power PWB troubleRemedy (Check) Check the power full wa

Page 54

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 58U0 0 Case 1 Trouble position/causeBad connection of the signal line between the PCU MAIN PWB and

Page 55

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 59U2 11 Case 1 Trouble position/causeEEPROM troubleRemedy (Check)(Repair) Replace the EEPROM. / SI

Page 56

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 66. DetailsU6 9 Large capacity tray (LCC) lift motor troubleLarge capacity trayPaper feed SIM 1520

Page 57

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 60U2 22 Case 2 Trouble position/causeICU MAIN PWB troubleRemedy (Check)(Repair) ICUMAIN PWB replac

Page 58

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 61U4 2 Case 1 Trouble position/causeAlignment home position sensor (DPHPS) troubleRemedy (Check) C

Page 59

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 62Main codeSub codeTitlePCU MAIN PWB - RADF communication troubleU5 0 Phenomena Display LampMessag

Page 60

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 63U5 3 Case 2 Trouble position/causeRADF control PWB troubleRemedy (Check)(Repair) RADF control PW

Page 61

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 64U6 20 Case 2 Trouble position/causePCU MAIN PWB troubleRemedy (Check)(Repair) Replace the PCU MA

Page 62

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 65Main codeSub codeTitleRIC communication troubleU7 0 Phenomena Display LampMessageDetail Communic

Page 63

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 66Main codeSub codeTitleCPT board RAM troubleUC 4 Phenomena Display LampMessageDetail CPT PWB RAM

Page 64

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 7C1 10 Case 2 Trouble position/causeImage density sensor troubleRemedy (Check) Image density senso

Page 65

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 8C1 11 Case 3 Trouble position/causeTransfer belt trouble (dirt, scratches)Remedy (Check) Toner di

Page 66

AR-C330 SELF DIAG MESSAGE AND TROUBLESHOOTING 10 - 9C1 12 Case 4 Trouble position/causePCU MAIN PWB troubleRemedy (Check)(Repair) PCU MAIN PWB replac

Commentaires sur ces manuels

Pas de commentaire