Sharp CS-2870 Manuel d'utilisateur télécharger pdf (Page 8)

(§)

or [h] has been pressed in addition and subtraction.

Note: • The count is printed when the memory is recalled.

• Pressing of clears the counter.

Neutral

Note: The counter has a maximum capacity of 3 digits (up to ±999). If

the count exceeds the maximum, the counter will recount from

zero.

FIRST FACTOR ACCUMULATION SELECTOR:

Tr': The first factor is automatically added to or subtracted from the

memory. A first factor means the first number in multiplication and

division and each number is printed with "xl" and “^1" respectively.

Ex. 2x3x5t6 =

12-5-7x9 =

-56 X 4 X 0.5 =

Neutral

PAPER FEED KEY

B LAST DIGIT CORRECTION KEY

(Tg) ^ GRAND TOTAL KEY:

Prints and clears the “GT’ memory contents.

(13) gj NON-ADD/SUBTOTAL KEY:

Non>add - When this key is pressed right after an entry of a number in

the Print mode, the entry is printed on the left-hand side with

This key is used to print out numbers not subjects to calculation

such as code, date, etc.

Subtotal - Used to get subtotal(s) of additions and/or subtractions. When

pressed following [|] or B > ^he subtotal is printed with “0" and

the calculation may be continued.

By pressing this key even in the Non-print mode, the displayed number

is printed with “P”.

0 H TOTAL KEY:

Prints the total of addition and subtraction with ". This key also serves

as a clear key for the calculation register and resets an error condition.

0 ^ CLEAR ENTRY KEY:

Clears number entered prior to use of a function key.

Also used to clear an overflow error caused by an entry.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 26 27

Pas de commentaire

Sharp CS-2870 Manuel d'utilisateur Page 8